How to use

Let us have a look at the using instruction of the vacuum cleaner and the air compressor, now we will take our VC-108 to be a sample,as it is a 4 in 1 product, it combines air compressor, vacuum cleaner, light and gauge.

 

How to use the vacuum cleaner:

 

1. Start the car engine to idle state, take the product out of the box, connect the accessories, insert the plug directly into the DC 12-13 .6 V car cigarette lighter socket, turn on the switch, then it will work. In order to keep save, please do not use any other converters during working,.
2. In order to achieve high suction power, please keep the filter clean. If the filter is too dirty, please clean it in time. It can be washed directly in the water. After washing, the filter must be fully dried. If there is water in the filter, it will greatly reduce the suction power of the vacuum cleaner.
3. Every time finish using, please tidy up and put away the product. Clean up the garbage and dispose of it properly. Please protect the environment.

 

How to use the light:

 

1. Start the car engine to the idle state, take the product out of the box, and insert the cigarette lighter plug directly into the DC 12-13.6V cigarette lighter socket, please ensure that the power is turned on, so the LED light will be always on.

 

How to use the air compressor:

 

1. Start the car engine to the idle state, take out the product from the box, connect the accessories, and insert the cigarette lighter plug directly into the DC 12-13.6V car cigarette lighter socket, please do not use any other converters.

 

2. Clean the dust of the tire inflation nozzle to ensure that the nozzle is clean. If the nozzle is rusted, wipe it with a lubricant or detergent before connecting the product.

 

3. Connect the vacuum cleaner with the air hose. Put the product in a flat place beside the tire, and then connect with the tire. There may be a little gas leaking when connecting, please don’t worry, it indicates that the tire valve is unobstructed. Then please continue to connect the air hose into the tire. When the inflation hose and the tire valve are fully connected, no gas will leak out. At this time, the tire pressure gauge will be displayed. Now you can open the switch to inflate the tire.

 

4. When inflating the tire, the values in the gauge will be increased. When the values reaches the appropriate air pressure (normal car tire pressure is about 2.5kg/cm2), turn off the product switch and quickly remove the air tube on the tire. Please unplug the cigarette lighter, organize and store the product.

 

5. If it is a digital gauge, first please set the value to be inflated with +/- on the digital display, and use R key to choose three measure freely: KG/BAR/PSI. Normally, the inflation pressure of the car tire is 2.5KG. /300BAR/35PSI, after connecting the product and the tire together, open the switch, when the tire pressure reaches 2.5KG/300BAR/35PSI, the machine will automatically cut off the power. Stop inflating to protect the tire from being overcharged.

 

How to use the gauge:

 

1. Start the engine of the car to the idle state, take out the product from the box, connect the accessory, and insert the cigarette lighter plug directly into the DC 12-13.6V car cigarette lighter socket.do not use other converters.

 

2. Clean the dust of the tire inflation nozzle to ensure that the nozzle is clean and. If the nozzle is rusted, wipe it with a lubricant or detergent before connecting the product.

 

3. Please connect the air outlet of the vacuum cleaner with the air hose. Put the product in a flat place beside the tire, and then connect with the tire. There may be a little gas leaking when connecting, please don’t worry, it indicates that the tire valve is unobstructed. At this time, you should continue to connect the air hose into the tire. When the inflation hose and the tire are fully connected, no gas will leak out. At this time, the tire pressure gauge will be displayed.

 

4. If the gauge is a digital screen display, you need to insert the cigarette lighter to the car to get the power. If it is a pointer gauge, you do not need to connect the cigarette lighter power supply.

 


Post time: Jan-20-2021